CSA C22.2 NO. 248.13:00 (R2019)
Low-Voltage Fuses - Part 13: Semiconductor Fuses (Tri-national standard, with UL 248-13, second edition, and with the first edition of NMX-J-009/248/13-2000-ANCE)
This is the common UL, CSA, and ANCE Standard for Low-Voltage Fuses Part 13: Semiconductor Fuses . This is the second edition of CSA C22.2 No. 248.13-00 (superseding the first edition, published in 1996), the second edition of UL 248-13, and the first edition of NMX-J-009/248/13-2000-ANCE.
This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.
This Standard has been approved by the American National Standards Institute (ANSI) as an American National Standard.
General NOTE This Part is intended to be read together with the Standard for Low-Voltage Fuses Part 1: General Requirements, hereafter referred to as Part 1. The numbering of the Clauses in this Part corresponds to like numbered Clauses in Part 1. The requirements of Part 1 apply unless modified by this Part. For Clauses not shown below, refer to the Standard for Low-Voltage Fuses Part 1: General Requirements, NMX-J-009/248/13-2000-ANCE CSA C22.2 No. 248.1 UL 248-1.
Scope:
This Part applies to semiconductor fuses rated 2000 A or less. DC ratings are optional.
NOTE: The Canadian Electrical Code, Part I, defines low voltage as any voltage from 31 to 750 V inclusive and high voltage as any voltage above 750 V. The National Electrical Code, NFPA 70-1996, Section 710-2 defines high voltage as more than 600 V, nominal.
CSA C22.2 NO. 248.13:00 (R2019)
Low-Voltage Fuses - Part 13: Semiconductor Fuses (Tri-national standard, with UL 248-13, second edition, and with the first edition of NMX-J-009/248/13-2000-ANCE)